- Visitor:
Richard Dunham
- Wilmington Ohio
on:
03-03-2013
E-Mail:
Thomasrd1 AT frontier DOT com
-
Lyman boat info and pictures for a 24 ft sportsman
- Visitor:
Billy Puckett
- Stanley, NC
on:
01-31-2013
E-Mail:
wpuckett2 AT carolina DOT rr DOT com
-
I have a boat that my father bought in the early 70s from a boat yard. I looks alot like the runabout 15 with a plastic windshield and a fiberglass hull in the lapboard design. It has two bench seat and the engine compartment is covered in the back with wood with the outboard cut out. Dad started a replacement of the transom and the boat is disassembled for the most part.
- Visitor:
chris goes
- delavan lake wisc
on:
01-29-2013
E-Mail:
cbgiv AT goeslitho DOT com
-
have 25 ft islander 1964 same family since new, teak deck recovered with vinyl wood deterated by 1995. need trumpet horn
- Visitor:
Philip L. Powell
- 121 South Genoa Avenue Egg Harbor City, NJ 08215
on:
01-27-2013
E-Mail:
-
Fantastic job and references. Thank you!!
- Visitor:
Randy Reiniger
- Tampa Florida USA
on:
01-12-2013
E-Mail:
Oldboatmotor1 AT yahoo DOT com
-
I have a 1931 Sportfour like the one on your site
- Visitor:
Ray Fournier
- North Branford, Connecticut, USA
on:
12-04-2012
E-Mail:
rcf_bladeworks AT yahoo DOT com
-
Your site is a welcome site for sore eyes. I am so glad I have found it. Thank you
- Visitor:
Thomas Laskey
- Coraopolis PA USA
on:
11-30-2012
E-Mail:
thomas DOT laskey AT us DOT army DOT mil
-
- Visitor:
Mike Mackey
- Oregon OH USA
on:
11-20-2012
E-Mail:
mikemack3 AT aol DOT com
-
- Visitor:
Michael Glover
- Broaddus Tx
on:
11-14-2012
E-Mail:
mlglover012 AT gmail DOT com
-
We were inhearted a 1957 lyman boat we would like to sell it,I can send you pics we dont know a lot about this boat please send your email address,Here is my
mlglover012@gmail.com
I think its 18ft with twin motors
Thanks Michael.
- Visitor:
John Konieczny
- New Paltz NY 12561
on:
10-11-2012
E-Mail:
ramseyreoinc AT aol DOT com
-
- Visitor:
Paul Mortimer
- Hartland,Wi. USA
on:
09-21-2012
E-Mail:
mattimoe47 AT att DOT net
-
- Visitor:
Tim McNamara
- Amherst, NH.
on:
05-07-2012
E-Mail:
tmcnamara58 AT gmail DOT com
-
- Visitor:
Bob Finneran
- Castalia, Ohio
on:
05-03-2012
E-Mail:
BobFinneran AT GMail DOT com
-
Looking for Lyman Insignia for 26' 1968 lyman , lost one on lake last year and remaining one could be reolaced. Thanks Bob
- Visitor:
Ray Brezina
- Parma, Ohio, USA
on:
05-02-2012
E-Mail:
breeze1955 AT att DOT net
-
I have a 1959 Lyman that has been in the family since 1965. We are only the second owner. Always looking for information. Good varnish, bottom paint, ect. It is in good shape.
- Visitor:
tom willard
- caroga lake, ny
on:
04-27-2012
E-Mail:
jaxwillard AT yahoo DOT com
-
i have a 1957 18' lyman runabout, and would like to replace the forward bulkhead door. do you make these, if i give you the measurements, or would you have a pattern for the anchor shape so that i could do it?
thank you, tom willard
- Visitor:
Jeremy
- Long Beach, CA USA
on:
04-05-2012
E-Mail:
tcx_jeremy AT yahoo DOT com
-
- Visitor:
Brooks Heller
- Dadeville, Al USA
on:
03-26-2012
E-Mail:
hsg1 AT charter DOT net
-
Hello Tom,
I am looking for at least one light, 2 1/2" diameter for the V berth of my 26' Cruisette Hardtop.More than one would be better to give me a spare or two, but one is my immediate requirement. Might you have any on hand ?
Thanks, Brooks Heller
- Visitor:
greg howell
- easton, maryland, usa
on:
03-24-2012
E-Mail:
gfh410 AT verizon DOT net
-
- Visitor:
Doug Quinn
- Paradise CA US
on:
03-23-2012
E-Mail:
primerman AT sbcglobal DOT net
-
- Visitor:
Cliff Rossi
- Rock Hall, MD, USA
on:
03-16-2012
E-Mail:
lindarossi954 AT gmail DOT com
-
- Visitor:
Erich Bukenberger
- Markham, Ontario, Canada
on:
01-28-2012
E-Mail:
bukenberger DOT e AT gmail DOT com
-
Hello
I own a 1956, 15 1/2' runabout that needs work.
I am a carpenter and collect old drawings and am wondering if I could purchase even partial plans to this boat so I can have it framed and add to my collection.
Let me know.
Thanks
Erich Bukenberger
- Visitor:
Glenn Milliken
- Boston, Ma. USA
on:
01-12-2012
E-Mail:
gmillikensr AT yahoo DOT com
-
restoring a 26' offshore
- Visitor:
Bob Reese
- Vermilion, OH
on:
01-01-2012
E-Mail:
rareese AT roadrunner DOT com
-
Hi Tom, Just got my second Lyman a 13' rowboat. By the dimensions and description in your book I make it an Ideal but I can only make out 4 of the 5 digits in the hull number (2?395). The second digit is a 0 or a 9 as best I can tell (only the right side of the digit shows faintly). I'd like to get the documentation package if you can help me pin down which of those two hull numbers would have been the Ideal model in either 1950 or 1953. Has anyone else "claimed" either number? Thanks so much for your assistance.
- Visitor:
Dick Elgie
- Woodstock Ontario Canada
on:
11-11-2011
E-Mail:
dick DOT elgie AT premierequipment DOT com
-
Recently became a Lyman owner and 19'6" #10732 told it is a 1946 and am looking forward to restoring it. Will be needing lots of your help and supplies. Dick
- Visitor:
Todd Green
- franklin, ohio usa
on:
11-06-2011
E-Mail:
midwest AT embarqmail DOT com
-
Just bought my first boat which happens to be a 1974 fiberglass Lyman. Am looking forward to restoring and getting on the water. Looking for all the input i can get. I am sure I will have many questions once I get started working on it.
- Visitor:
todd
- franklin, ohio usa
on:
10-28-2011
E-Mail:
midwest AT embaeqmail DOT com
-
- Visitor:
Todd Noe
- Newtown Pa U S A
on:
09-02-2011
E-Mail:
noeware AT gmail DOT com
-
Hi, what should I use to prime and paint the bottom of a 15 ft Lyman?
Hull# 44 9 15(?) the ply wood is in sound condition. This boat my stay at a mooring all New hampshire fresh water season .
- Visitor:
Mike H
- Williams Bay, WI
on:
08-22-2011
E-Mail:
mike AT gagemarine DOT com
-
Tom has always beeen very helpful,whenever I call him for information.
- Visitor:
Tom Butler
- wilmington, nc
on:
08-22-2011
E-Mail:
tominpul AT aol DOT com
-
Just purchased a 1964 Sleeper and will be restoring it. Boat is in good condition and is powered by a 401 Buick Nailhead Gray. It is being shipped from NY to NC next week.
- Visitor:
JOHN PERANZI
- tacoma, wa. usa
on:
08-16-2011
E-Mail:
PERANZI AT PERANZI DOT COM
-
i owned a 68 30' open cruiser . would like to find one again
- Visitor:
Elliot Rosen
- West Bath, ME, USA
on:
08-13-2011
E-Mail:
elliotdrosen AT gmail DOT com
-
Tomorrow I am purchasing a restored 1975 Cruisette belonging to a good friend. I am so excited I can barely stand it. I am 55... promise me that you'll outlive me or that you have plans for the business just in case!
- Visitor:
Jim Musselwhite
- wilmington, NC, USA
on:
08-12-2011
E-Mail:
hpgeek AT live DOT com
-
Whats the Beam dimension for a 1966 24' Lyman boat
- Visitor:
ed mencke
- berea ohio usa
on:
07-28-2011
E-Mail:
emencke AT sbcglobal DOT net
-
I just bought a 1965 sleeper,with the original motor.
do I need to put any additives in the gas to run the un-leaded gas?
- Visitor:
John Stax
- Guilford CT 06437
on:
07-18-2011
E-Mail:
Stax AT snet DOT net
-
- Visitor:
Tom Stuckert
- Findlay, Ohio
on:
07-15-2011
E-Mail:
t_stuckert AT yahoo DOT com
-
Mr. Koroknay,
My wife drove to Lexington to buy one of your books and have you sign it back in March. It was a gift for my birthday. Thanks so much. It is a real treasure as are my memories of riding the waves of Lake Erie with my dad in our three Lymans. My other memory is of our many, many trips to the Lyman factory while I was growing up in Sandusky.
I have a newspaper article from the Sandusky Register (Feb 16, 1935) announcing the Lyman Memorial Award in memory of Bernard Lyman who died on Feb 14, 1935. It is 2 pages and in .pdf If you could send an email address, I would be glad to send the .pdf's to you.
Thanks
- Visitor:
Terry Hansen
- Hamilton, Ontario, canada
on:
07-02-2011
E-Mail:
mntcman62 AT yahoo DOT ca
-
- Visitor:
Rob Blatt
- Hilliard, Ohio
on:
06-23-2011
E-Mail:
rb3t AT att DOT net
-
I am wanting to sell a never used solid brass water pump for a 1961, 138 hp gray marina v8. The pump was purchased by my father as a back up for his 20 ft runabout. Please contact me if you or someone else may be interested.
614-397-0134
- Visitor:
Bob Matson
- Ely
on:
06-22-2011
E-Mail:
rcmely AT frontiernet DOT net
-
Doc, congrats on the new book. I too have a book about boats and am looking for a publisher. Who published your book?
- Visitor:
Bart Hanline
- Charlotte, NC.
on:
06-21-2011
E-Mail:
bhanline AT carolina DOT rr DOT com
-
Just bought a 16 Lyman outboard and brought it back to my home in Charlotte, NC. I am loooking forward to getting started on restoration!
- Visitor:
thomas wood
- nova scotia canada
on:
06-12-2011
E-Mail:
bigbayboats DOT ca
-
Big Bay Boats was started in 2007, Thomas Wood, the owner, has been repairing and building dories and small boats for most of his life. Tom's earliest memories are on his father's wooden lobster boat. Since that he has spent countless hours in wooden dories fishing oysters in the bays and harbours of the Northumberland Strait.
- Visitor:
steve willcox
- ithaca ny usa
on:
05-13-2011
E-Mail:
wtire AT cnymail DOT com
-
- Visitor:
William Sullivan
- Wayne Michigan
on:
04-27-2011
E-Mail:
williamsullivan AT ymail DOT com
-
- Visitor:
Luke
- Kanab, Utah , United States
on:
04-22-2011
E-Mail:
porters DOT house AT yahoo DOT com
-
would like to find details on a Graymarine engine Model 109RD ,I alson have the engine # if this adds to the info.
- Visitor:
jim taylor
- ballston lake, ny usa
on:
04-07-2011
E-Mail:
jim DOT e DOT taylor AT att DOT net
-
It is difficult to source quality plywood today. When a good plywood source is located the product is still not as good as the original plywood Lyman used. When doing a full bottom restoration, why not use solid wood planking. It is still possible to source quality cedar and mahogany planking today.
- Visitor:
bruce traey
- marshall,mich usa
on:
03-30-2011
E-Mail:
raceboat527 AT yahoo DOT com
-
Boating on Lake Erie since 1941.. Many Lymans in the area now I want one. Give or take 50 boats in my past including 5 litre Lauterbach hydro on the Vintage Circuit. Ready to go slow and smooooth in a Lyman.
- Visitor:
Erich Bukenberger
- Toronto, Ontario, Canada
on:
03-29-2011
E-Mail:
bukenberger DOT e AT gmail DOT com
-
I would like you to restore the Lymann boat have.
Please contact me at 416 676 2520
- Visitor:
Tracey Gallingtona
-
on:
03-28-2011
E-Mail:
apri DOT llasdel DOT e AT gmail DOT com
-
- Visitor:
donald n jaggers
- elk mills maryland usa
on:
03-26-2011
E-Mail:
covecaptain AT aol DOT com
-
i am restoring a 13 ft lyman, 1947? i have too many floor boards i think and don't know how they lay out. any help would help. thanks
- Visitor:
DEAN OLSON
- MANTUA, OHIO 44255 USA
on:
03-22-2011
E-Mail:
WALLWERKS AT YAHOO DOT COM
-
LOVE WORKING ON WOODEN BOATS, AND GREW UP IN LYMAN BEATS.
- Visitor:
Larry MacDonald
- Salem, NH USA
on:
03-03-2011
E-Mail:
lmacdonald AT f5 DOT com
-
- Visitor:
michael wiard
- sparta nj usa
on:
03-01-2011
E-Mail:
nomad2055 AT aol DOT com
-
I just brought home from Ohio a 1955 13'er, I think it is a fisherman model as there are not backs on the seats. can't find a hull number anywhere? it's got some rot in the transom frame that runs along the bottom of the transome, the transome brace and a few ribs. do you sell thease parts and what are they made of? it's got a 1958 super seahorse 35hp on it. would like to send you some pic's. concrats on the book, GREAT job and it is an excelent referance. Thanks, Mike
- Visitor:
Morgan King
-
on:
02-27-2011
E-Mail:
fridapinto34 AT aol DOT com
-
- Visitor:
rodney richards
- davisville, wv, usa
on:
02-22-2011
E-Mail:
rodrowdy AT yahoo DOT com
-
i just purchased a 1961 24 foot lynan boat with only 1500 hours on it. the 327 engine purs like a kitten and the trans goes in both forward and reverse. have in garage has not been in water since 2006.
- Visitor:
frank reynolds
- parkersburg,wv
on:
02-20-2011
E-Mail:
franksbodyshop49 AT yahoo DOT com
-
just drug home new project 24'-1961 hardtop,327-gray marine ,twin side drafts,engine has 1800 hours,runs great.hardtop missing ,wind shield and side window frames need work,roof gone.like to purchase whole assembly or drawings if possible.hull#h1057.has aluminum wing windows have never seen on any lyman pictures .could this be a owner modification?appreicate any help.
- Visitor:
Sean Brown
- United States
on:
01-11-2011
E-Mail:
sseannyb AT aim DOT com
-
Hello my name is sean, i am 22 years old and has been into boating my entire life. I am now a proud owner of a 1974 24ft Lyman, its in great condition with a rebuilt chrysler lm318 , and aluminum gas tanks added about 9 years ago, i know a lot about the boat mostly because i work at the marina in which the original owner keeps his new boat. The only thing i cant pin point is the value of the boat, the boat is in very good condition, thank you if you can please get back to me on the value and any other interesting information you could tell , thank you have a great day
- Visitor:
dustin and bill crey
- holland
on:
01-10-2011
E-Mail:
slipperyhook AT bex DOT net
-
our first wood boat 1954 liman islander 18ft never owned a wood boat only needs paint i can not wate in till spring to put her n
- Visitor:
gatlomensa
-
on:
01-07-2011
E-Mail:
alexhphilip AT aol DOT com
-
- Visitor:
Scott Jennie
- Medina, Ohio, USA
on:
12-29-2010
E-Mail:
scott DOT jennie AT parker DOT com
-
I have a 1957 Lyman runabout that is in nice shape...however, I am interested in having it gone over and made ship-shape. How do I get pricing or an estimate from you?
Thank you,
Scott
- Visitor:
Ken Welshhans
- United States
on:
12-09-2010
E-Mail:
kmproperties AT roadrunner DOT com
-
- Visitor:
Paul Mucciolo
- Flagler Beach, Florida, USA
on:
11-29-2010
E-Mail:
paulmucciolo AT me DOT com
-
- Visitor:
dustin carey
- holland ohio
on:
11-18-2010
E-Mail:
slipperyhook AT bex DOT net
-
- Visitor:
John Kerr
- Sand Springs, OK, USA
on:
11-04-2010
E-Mail:
kerr DOT j AT cimtel DOT net
-
I just bought a 16.5' runabout in fair shape. Can you provide any information on hull serial 47567, such as year built (reputedly 1957), where originally sold, original outboard type and HP or anything elde?
- Visitor:
John Kerr
- Sand Springs, OK, USA
on:
11-04-2010
E-Mail:
kerr DOT j AT cimtel DOT net
-
None yet
- Visitor:
mrs baliqis shawn
-
on:
10-25-2010
E-Mail:
baliqiss AT yahoo DOT com
-
- Visitor:
John Dupee
- South Burlington, VT
on:
10-23-2010
E-Mail:
jdupee AT myfairpoint DOT net jdupee AT comcast DOT net
-
1966 25' sleeper K1635
Intersted in any info on refinshing brightwork
- Visitor:
Conrad Joseph
- Londonderry, N.H. 03053
on:
10-21-2010
E-Mail:
reacon2003 AT yahoo DOT com
-
Just bought a 1953? Lyman 4 cyl grey modle 620,60Horse When I looked up the registration it said model year was 1948.
It also said it was a out board motor
The person I bought it from said it was made in 1948 but released in 1953. Hull #A3114 Could you please give me some input using the hull#. Thanks
Conrad
- Visitor:
shep
- Mich
on:
10-14-2010
E-Mail:
dks2261 AT yahoo DOT com
-
- Visitor:
Richard G. Pettyjohn
- Charlotte, NC 28226
on:
10-06-2010
E-Mail:
rpettyjohn1 AT carolina DOT rr DOT com
-
I have what I think is a 19'Lyman Outboard which I purchased several years ago as is. The previous owner supplied me with what he beleaved to be the serial number, 01514. I was wondering if you have a resource on serial number and if so could you run this number and see what come back if anything.
I am going to need a new transon for my boat and will get back to you on the procurement of that item.
Look forward to hearing back from you.
Thanks: Richard Pettyjohn
- Visitor:
JACK PICOU
- BUCYRUS OHIO
on:
10-05-2010
E-Mail:
uocip23 AT hotmail DOT com
-
Would like to know what a 1953 double sidewinder would be worth?
- Visitor:
Danny Shaw
- Salisbury, NC, United States
on:
09-29-2010
E-Mail:
info AT suddenimpactautobody DOT net
-
I am checking to see if you can tell me what make and model of boat number 53834 is.
Thanks
- Visitor:
James
- Lorain, Oh USA
on:
09-28-2010
E-Mail:
jeanieb711 AT yahoo DOT com
-
I have a 21 ft, 1956 Lyman boat. I see all kinds of other sizes but never that size for this year, is this a rare boat?
- Visitor:
MIKE SCULL
- SOUTH JERSEY
on:
09-28-2010
E-Mail:
m_scull AT msn DOT com
-
just aquired 1954 18ft islander,60hp gray
- Visitor:
Patrick Miller
- Chicora Pa
on:
09-28-2010
E-Mail:
patrick279 AT gmail DOT com
-
I would like to know the top speed of 21"we also fish 21' 1963 Lyman runabout? Would it make an ok Ski Boat? We also fish on Lake Erie, would it also make a good Erie boat?
- Visitor:
Edward Fry
- Pittsfield ma
on:
09-09-2010
E-Mail:
edward DOT fry AT gmail DOT com
-
- Visitor:
Dan Grahovac
- Wooster, Ohio
on:
09-04-2010
E-Mail:
Bassmaster317 AT yahoo DOT com
-
Can you tell me if you hire at all during the winter months? I've taken wooden boat building courses at Wooden Boat School in Brooklin, Maine? Would appreciate your response and thanks. Dan
- Visitor:
yves michaud
- st-jean-sur-richelieu québec canada
on:
09-03-2010
E-Mail:
lerapailleur AT videotron DOT ca
-
au canada,je cherche un bateau lyman sleeper hard top fisherman 25 pieds.
yves michaud
- Visitor:
Huw Thomas
- Newport, RI
on:
09-02-2010
E-Mail:
huw DOT thomas AT logicalchoices DOT com
-
I'm trying to find our old family boat.
1971 - Syracuse, NY. 16 Lyman. Called Auk.
Does any one have any idea how I could go about locating this boat?
- Visitor:
george baker
- middleburg fl.
on:
09-01-2010
E-Mail:
irwincc AT yahoo DOT com
-
have 18'islander 1954 model on hd. trailor in michigan
- Visitor:
Bill Chesbrough
- Burlington, Vermont
on:
08-29-2010
E-Mail:
wchesbrough AT gmail DOT com
-
Looking for a chrome gas cap for my 1968 26' Lyman
- Visitor:
Beth Baaske Babcock
- Perrysburg, OH
on:
08-28-2010
E-Mail:
BABabcock53 AT aol DOT com
-
My father worked at the Sandusky plant from the late 40's to the early 70's. Thanks so much for compiling the Lyman information!
- Visitor:
Jeffery Vogel
- Orchard Park NY 14127
on:
08-25-2010
E-Mail:
jff,vogel
-
I own a 15.5 Lyman that is in need of some restoration. Do you know of anyone I should consider.
- Visitor:
bert schafer
- south haven ,mi usa
on:
08-11-2010
E-Mail:
bertschafer AT comcast DOT net
-
- Visitor:
allen
- charlestown in.
on:
08-09-2010
E-Mail:
yellowbiker2001 AT aol DOT com
-
would like to know about how much a 16.5 foot outboard 1958 lyman boat weighs that has been fiberglassed with trailer and 150 hp motor
- Visitor:
Richard P. Craft
- Elmore, Ohio USA
on:
08-08-2010
E-Mail:
craftscraft AT yahoo DOT com
-
Looking for Lyman hardtop in wood or fiberglass, cruisette or not, gasoline powered, preferred straight inboard (can be one or two engines), no flying bridges in good to excellent condition
- Visitor:
Thomas Sherry
- North Tonawanda, NY 14120
on:
08-08-2010
E-Mail:
tscott58 AT aol DOT com
-
Hope to someday buy a fully restored 16' Lyman OB or a Penn Yan Mariner OB
- Visitor:
Ashley Pimsner
- Chicago, IL
on:
08-08-2010
E-Mail:
apimsner AT yahoo DOT com
-
- Visitor:
Harold Avers
- Detroit, MI USA
on:
08-07-2010
E-Mail:
hafriend2 AT yahoo DOT com
-
Just purchased a 1964 16ft Lyman. Have always loved a Lyman since a youth - now check off my bucket list. It's time to get to work!
- Visitor:
lance bubb
- port clinton, ohio
on:
07-24-2010
E-Mail:
lancebubb1 AT msn DOT com
-
I have a 1964 18ft lyman with an 85hp outboard and was wondering why Im having such a problem selling it and why I cant find any pictures of my model lyman anywhere
- Visitor:
Paul Smith
- Wolfeboro, NH, US
on:
07-19-2010
E-Mail:
psmith AT benstrat DOT com
-
Enjoying a 1962 - 21' Runabout on Lake Winnipesaukee.
- Visitor:
chip scholl
- mount vernon, Iowa, 52314
on:
07-12-2010
E-Mail:
crscholl AT yahoo DOT com
-
I am considering the purchase of an 1964, 18 foot, IB/OD (85 hp), runabout.
- Visitor:
DAN DOLBERT
- FARMER CITY IL 61842
on:
07-10-2010
E-Mail:
chasd43 AT HOTMAIL DOT COM
-
I HAVE JUST PURCHASED A LYMAN LATE 50,S AND THE WORK BEGINS SOON TO RESTORE IT
- Visitor:
Elizabeth auger
-
on:
07-07-2010
E-Mail:
elizabethauger AT hotmail DOT com
-
- Visitor:
A Burmester
- Pentwater MI
on:
07-07-2010
E-Mail:
afburm AT charter DOT net
-
re: an early '50'an vintage 13'outboard runabout.
needs a transom replacement. what is the ballpark cost?
- Visitor:
bruce prewitt
- cincinnati,ohio hamilton
on:
07-02-2010
E-Mail:
jprew AT fuse DOT net
-
- Visitor:
Lisa Marshall
- Munnsville, NY 13409
on:
06-26-2010
E-Mail:
oneidafloral AT live DOT com
-
Just took posession of a 1951 13' center deck Lyman!!!!!!!! Great shape....will use this summer and completely refinish Winter, 2011.Any one know the right stain.mine is a blond...two owner boat
- Visitor:
Paul Brozen
- Bayside, New York
on:
06-14-2010
E-Mail:
PaulBrozen AT hotmail DOT com
-
looking for service manual, wiring diagram, etc
for 20' 1955 Lyman
- Visitor:
George Heider
- Webster, NY Monroe
on:
06-09-2010
E-Mail:
gheider AT rochester DOT rr DOT com
-
- Visitor:
Bill Caruthers
- Durant, Oklahoma Bryan County
on:
06-07-2010
E-Mail:
caruthersb AT aol DOT com
-
Looking for info on a late 1940's lyman cruiser.
- Visitor:
Dale Yirsa
- lemont
on:
06-07-2010
E-Mail:
13209 south archer avenue, lemont, illinois 60439
-
I have a wooden I/O that I believe might be a lyman. It has an early 60's 6 cylinder Ford motor and the steering wheel says "Interceptor" The only nameplate on it is "DELTA" on the rear of the boat. How can I tell what it is? I can send pics.
- Visitor:
Colleen Lyman
- Houston Texas USA
on:
06-05-2010
E-Mail:
colleenlyman991199 AT windstream DOT net
-
I was interested in the family name and history to see if it intersects with my own.
Next -->
|
